Design Request

Design Proposal Request (Imperial)
The following is for Imperial units. For Metric units, please click here.

Please fill out as much information as possible for an accurate response. After clicking Submit, your information will be sent to one of our engineers. You will receive a response as soon as your information is reviewed. The phone number will only be used if we have questions regarding your request. All information will be kept confidential.

If your design is complete and you want to know what an equivalent dosage of fiber would be to replace the specified steel, then you would need assistance for a steel to fiber conversion, please click here.
Submitted By
Submitted By*

First NameLast Name
Title
Email*
example@example.com
Are you in contact with a FORTA representative on this project? If so, who?
Company Information
Same as Submitted

Yes
Customer Name*

First NameLast Name
E-mail*
Phone Number
Company Name*
Company Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip CodeCountry
Design Request
Please detail your request for the associated design
If current design exists, please attach design information: (drawings, specifications, calculations, FEA, loads, cut sheets, or geotech reports)
Upload Drawing(s)
(Max filesize: 5MB) Cancelof
Upload Specification(s)
(Max filesize: 5MB) Cancelof
Upload Other Document(s)
(Max filesize: 5MB) Cancelof
If no current design exists, please provide as much of the following information as possible:
Project Information
Project Name*
Project Location*
Fiber Length
Structure Type

Slab-on-Ground (Interior)Pavement (Exterior)OverlayTopping-SlabPrecastShotcreteOther
Slab Thickness (in)
Concrete Strength (psi)
Joint Spacing
Column Spacing (ft)
Concrete Flexural Strength (psi)
Geotech Report Available

YesNo
Modulus of Subgrade Reaction, k (psi)
Upload Geotech Report

Cancelof
Load Cases
Uniform Distributed Live Load(s) (UDL)Wheel / Forklift Load(s)Rack Post Load(s)Point Load(s)Line Load(s)Moment(s)Other
Uniform Distributed Live Load(s) (UDL)
Live Load (UDL, lb/sq ft)
Additional Information
Add additional UDL Case
Wheel / Forklift Load(s)
If you know the Model Number, please provide it and you do not need to fill out any other information.

Otherwise, provide as much information as you can. Key information is: Vehicle Type, Vehicle Weight, and either Capacity or Axle Load.
Model #
Vehicle Type

Fork truckSemi-trailer (HS-20)Other
Vehicle Weight (lb)
Capacity (lb)
Axle Load (lb)
Tire Type

SolidPneumatic
Tire Pressure (psi)
Wheel Width (in)
Wheel Spacing (S, in)
(see image)
Axle Spacing (Sa, in)
(see image)
Dual Wheel Spacing (Sd, in)
(see image)
Additional Information
Add additional Vehicle Load Case
Rack Post Load(s)
Post Load (lb)
Total Load on Rack (lb)
Rack Length (L, in)
Rack Width (W, in)
Back-to-Back Spacing (Z, in)
Baseplate Dimensions (X x Y, in)
Additional Information
Add additional Rack Post Load Case
Point Load(s)
Point / Column Load (lbs)
Baseplate Dimensions (X x Y, in)
Add additional Point Load Case
Line Load(s)
Line Load (lbs per linear ft)
Add additional Line Load Case
Moment(s)
Moment (kip-in/ft)
Finite Element Analysis

Upload a File

Cancelof
Add additional Moment Case
Special or Unusual Case(s)
Information
Add additional Case
Business Hours (needed for Salesforce Integration)
Email (old format)
Should be Empty:

Design Proposal Request (Imperial)

Submitted By

Company Information

Design Request

Project Information

Load Cases