480GT & ZUND Calculator

Printing Options
Note: For all entries only enter NUMBERS ONLY.
The fields are already setup to determine the values.
Dynamic Dropdowns
Finished Length (inches)
Finished Width (inches)
Number of Finished Pieces Required
Printed Sides

1 Sided Print2 Sided Print
Please select the Estimated SetUp time for a FULL board - per side.
Quality Level of Print
Print Speed per Sq ft
Level of Ink Coverage
Ink (ml) Usage per Board
Ink (ml) Usage per Board (including 2 sides)

Cutting Options
Note: The ZUND cutter has a top speed of 39 inches/second. This is OK for paper or foam. Please select a much slower speed when the need for accuracy is important.
- Paper or Foam (15 to 39)
- Coroplast or BubbleX (15 to 39)
- DiBond or MaxMetal (5 to 10)
- Acrylic (3 to 10)
Cutting Speed - 2 inches/second to 39 inches/second
Number of Cutting Passes Required

Regular - (x1)DiBond - (x2)Acrylic - (x3)
Total Number of Inches to Cut
Total Time to Cut in Seconds
Total Time to Cut in Minutes (Note: 5 minutes will be added per board - for Prep)